No products in the cart.
Smallest fix I’ve done so far, had to move a trace one pin on the microcontroller, 0402 MLCC for scale. 1
Smallest fix I’ve done so far, had to move a trace one pin on the microcontroller, 0402 MLCC for scale.
Smallest fix I’ve done so far, had to move a trace one pin on the microcontroller, 0402 MLCC for scale.
Cut trace, removed solder mask, added solder to the bare copper, tinned a piece of enameled wire and soldered it on the trace while holding it against the microcontroller leg. The heat the wire conducted melted the solder on the leg. Then I cut off the excess with an exacto knife